If a person cleans their drains on a regular basis they can prevent a number of plumbing problems. They can help prevent the drain from becoming clogged and an odor building up. Drain pipe cleaning is made simple in these 5 easy steps and will keep the water flowing through the drain properly.
To prevent the drain from clogging a screen should be used. This will help hair, soap scum, and other items from getting into the drain. The screen should be cleaned after every use.
There are certain things that should not make it down the drain. This includes grease. Grease is one of the main drain clogging agents. . Before washing pots and pans that contain grease be sure to wipe them out with a paper towel. Once the pots and pans are wiped out to help remove any built up grease, use hot water to finish cleaning them. Do not pour chemical down the brain either. This includes paint, paint thinner, and cleaning products. There are special products that are made for cleaning the drain and they should be the only type of cleaning product that is used.
Step 3 Weekly Cleaning
The drain should be part of the weekly cleaning process. Once a week boiling water can be poured down the drain. This will help remove any materials that have become stuck. Boiling water will also help kill bacteria that may have become trapped in the drain.
Once a month the drain should be give the drain a deep cleaning. To do this three cups of boiling water should be poured down the drain with one cup of baking soda. Once this mixture has dissolved squeeze fresh lemon juice down the drain and allow it to sit for at least an hour. If no fresh lemon juice is available a half cup of lemon juice concentrate can be used in its place. After an hour the drain should be free of all clogs.
If there is a clog in the drain a person should use a plunger to try to remove it. The plunger is placed firmly on the drain to create a seal that is tight. The plunger is then pressed down to help remove any clogs. If the plunger is not effective a barbed plastic drain cleaner can be used. This tool is inexpensive and easy to use. A person holds one end and puts the barbed part into the drain. The tool is slowly dragged back up and any debris will come out stuck on the barbed plastic. This is useful for cleaning bathroom sinks and bathtubs. If the clog is stuck deep into the drain a wet/ dry vacuum can be used. The tube of the vacuum is placed over the drain and then it is turned onto blow mode. The power is turned on and off until the clog comes out of the drain.
These are some easy ways to clean a drain pipe and to help prevent clogs from forming. As soon as a clog is noticed a person should take measures to remove the clog. This will help them save money in the long run and keep the drain working properly.